Water Feature Pump 2000lph

Water Feature Pump 2000lph suitable for medium to large size slate and stone water features.

Specification

• Model: 2000
• Maximum Output: 2000lph Pump / 440gph
• Power: 43W
• Maximum Height: 3.0m
• Hosetails: 19mm

Dimensions

• Length: 118mm
• Width: 101mm
• Height: 158mm

Features

• Highly insulated and water proof
• New, high performance impeller design
• Built-in overcurrent and and overheat protection
• Multi-functional design, suitable for water filters, fountains or pumping water in a variety of situations
• Simple to use and maintain
• Steady and quiet performance

Usage

Suitable for outdoor water features only. Can be run continuously, 24 hours per day.

• The device should be placed in enough water to ensure that the pump body is always covered. The water feature hose should be connected to the pump outlet, which will then feed water to the outlet in the feature. Hose clips (not supplied) may be used for extra fastening, but are not supplied.
• The pump output is adjustable. To turn water flow up or down slowly turn the disc on the front of the pump either clockwise or anti-clockwise, watching water output as you do so.
• When first connected to the power, spend 30 minutes checking that the pump is running as it should, steady, normal, and without any abnormal flow, or fault. Check connections to the water feature to ensure there are
  no leaks.

In compliance with UK electrical regulations, Water Feature Pump 2000lph is supplied without a fitted plug. A suitable plug or outdoor switch box will need to be purchased separately. Free UK Delivery.